This information can be found on the bottom of the camera or on the WIFI configuration card that came in the box. Step 11: Enter the WIFI settings for your DCS-5025L. Step 10: Tap Ready (The power LED should be flashing orange) Step 6: Select the DCS-5025L from the list of cameras Step 3: Launch the mydlink lite app and Tap on the Local Tab Step 2: Power on your DCS-5025L and wait until the power LED starts to flash orange/amber It can downloaded from the Google Playstore Step 1: Download and install the mydlink lite app on your android device. You can now view you camera using the mydlink Home Canada app on your smartphone or using the mydlink portal at

Step 12: The cameras LED should now be Green and the setup is now complete. Please ensure that you are entering the correct password for your home wifi signal. If the LED does not turn Green and stays RED, the camera was not able to connect to your wifi signal. Step 11: When prompted, remove the Ethernet cable from your camera and click OKĪt this point, the cameras LED will turn RED for a few seconds and then should turn Green. Step 10: If your wireless network is security enabled, you will be prompted to enter in your WIFI password. Note: If you do not want to connect the camera wireless and want to use it with an Ethernet cable, click No,Thanks Select the WIFI signal you want to connect the DCS-5025L to and click Next Step 9: The wizard will start to scan for wireless signals. Step 8: Create a new mydlink account or select existing account if you are already a mydlink member This password is used for configuring advanced settings in the camera through its web interface. Step 7: Configure a name for your camera and create a new password for it. Note: If your camera is not being displayed, disable any firewalls you may have on your computer, as it may block the connection Step 6: The setup wizard will scan your network looking for your connected DCS-5025L. Step 5: From the drop down box, select the DCS-5025L and click Next Step 4: Check 'I have read.' and click I agree Select your desired Language and Click Start Step 2: Power on and plug your DCS-5025L into your router/network using an Ethernet cable. MAC Version- UNIVERSAL_SETUP_WIZARD_MAC.zip PC Version- UNIVERSAL_SETUP_WIZARD_WINDOWS.zip Step 1: Download the DCS-5025L setup wizard: Apple/iOS- Select this method if you are setting up the camera using the mydlink lite app for Apple/iOS.Android- Select this method if you are setting up the camera using the mydlink lite app for Android.Setup Wizard Application (PC/MAC)- Select this method if you are setting up the camera from your computer Note: This example shows the setup using Apple iOS. How do I set up and install my DCS-5025L?

Wireless setup wizard for macintosh